192.168.1.1 is the default IP address for network settings of most of the routers of popular brands. However, there can be several errors that might emerge as a result of some sort of misconfiguration of the IP address. Also sometimes the IP address router page and the network connection and other settings might be working at the beginning but then it might throw some error suddenly. Out of these errors, a 502 bad gateway error is a very common error in the network configuration. Here we are discussing how to solve the error for Linksys router, but it would work for other routers too.
Most commonly such error is caused due to an outdated firmware of the Linksys. This error started appearing when the Linksys removed captcha image from the router page which was used to create Linksys SmartWifi account. After this update, there were several errors caused even while updating. Check steps to solve the 502 bad gateway error below.
How to Solve the 502 Bad Gateway Error?
Step 1 – First you must disconnect all the cabled from the router apart from the power cable. Then turn on the router and make it stable.
Step 2 – Press the red button to reset the router. You must press this button for at least 20 seconds.
Step 3 – Now you must wait till the router is stabilized.
Step 4 – Now you need to connect your device i.e. computer or laptop to the Ethernet ports. Make sure you do not connect to the internet port or the wifi port.
Step 5 – Now the Bad gateway error should be solved. If it is still coming then check with a different browser or clear the browser cache.
Step 6 – Now after the error is cleared you will see the initial set up page. On this page go to the Manual configuration option and tick ToS and then press Next.
Step 7 – Do not choose to login using the SmartWifi account and click on “For local access click here”. This option will come under the language choice drop-down menu.
Step 8 – You must enter the Router Password, which is by default “admin”
Step 9 – You may need an internet connection to download the latest Firmware for the router.
Step 10 – Go to the link support.linksys.com and enter the Model Number associated with your router (it can be found on the sticker under the router, Model No, also look for version number if there is like v1 or v1.1 after the Model Number!)
Step 11 – If there is only the Model number mentioned on the list then enter it or you may click it in case of the dropdown.
Step 12 – After this step, you should be redirected to the router’s Linksys webpage.
Step 13 – Go to the Downloads page, you can do that by scrolling the page or it can be in the form of a tab. Click on the “Download Software” option.
Step 14 – Now you must choose the version of your router.
Step 15 – After that, you must download the latest Firmware.
Step 16 – Now connect your device to the Linksys router and log in.
Step 17 – Now browse to Connectivity, and update the Firmware Manually as you have downloaded the firmware file and now you can start the upgrade.
192.168.1.1 Router Admin Setup:
192.168.1.1 address is normally used by Linksys router and also can be used by some other router or home network gateway. This address is used by network administrators when setting up Internet connection or updating the settings of the router. Any device like the printer can also use this address. It belongs to private IP address range that starts with 192.168.0.0 and extends through 192.168.255.255.
- Every router has configuration pages that you can use to change network setting and setup configuration
- First, you need to open your web browser
- Then enter your router’s IP address in address bar
- Linksys routers use default IP address 192.168.1.1
- Then login window will appear where you have to enter username and password
- Now router’s IP address will become 192.168.1.1 and login information will be both “admin”.
Now the 502 bad gateway error should be completely gone and also the Smart wifi can be used in the routers settings. If you have any issues then use comment form which has given below.