Most commonly used in computer networks at business houses, 10.0.0.1 is a private IP address. Some router manufacturers also assign it as the default IP address in their products, for example, Cisco brand routers and network routers. The address can work just as efficiently in a home computer network as in a business office.
The IP address is a 32-bit code that can locate its host on a particular network. Since the 10.0.0.1 IP typically represents the local side of the router’s connection to the internet, it is also known as the default gateway.
What is 10.0.0.1 Ip Address? – How To Setup 10.0.0.1 Login Page:
Organisations often choose to create a subnet from the default gateway. A subnet creates a separate network that allows streaming on both the networks without affecting the quality of performance. Since an organization usually features a large computer network where different departments are engaged with the internet simultaneously, subnets are used to maintain an effective speed of the internet throughout the network.
More devices on a single network will generate more traffic and slow down the speed of the internet. The subnet divides the network into two platforms, thus managing the traffic efficiently. Though an administrator can divide 32 bits into 24-bit length for network prefix and 8-bit length for host prefix, the most common combination is 16-bit length for network prefix and 16-bit length for host prefix.
This helps the router to divide the traffic and allocate internet usage between the two IP addresses and facilitates each platform to act as an individual gateway with different routing prefixes.
Also Read: 192.168.1.1 Admin Login Password
How To Login 10.0.0.1 IP Router:
The wireless gateway can also be used to customize your Internet settings so that it is better suited for your way of using the internet and the network.
In order to make the changes, the device must be connected to the wireless gateway. The tool is easily accessible through any internet browser at http://10.0.0.1. The gateway usually has a default combination of username and password and it is advisable to change it to make the network connection completely secure. The default username is ‘admin’ and the default password is ‘password’.
Once You Access The Settings, You Can Change:
- The Wi-Fi network name (or SSID)
- The Wi-Fi password (or network key)
- The network settings (including firewall and open/closed ports)
- Adjust Parental Controls
Connecting To A 10.0.0.1 Router:
Since private IP addresses are reserved IP addresses and cannot be accessed directly from outside the network, these can only be accessed from behind the router. The router can be accessed through the webpage http://10.0.0.1. Once the page loads, it will request the admin console for the router and ask you to fill the username and password combination.
Default Username and Password:
The routers are configured with a pretty standard default username and password combination at the factory itself by their manufacturers. Some of the most common ones are:
Since these credentials are easily available on the internet, it is advisable to change the password to keep the network secure.
Cannot Connect To Your Router?
In case the default username and password combination does not work, you can try to manually reset the router. This will restore the factory settings and then you can log in using the default combinations. Another recurring error in connectivity is that there might not be any actual devices using the IP address 10.0.0.1. This can be easily resolved by using the ping command to determine whether a device on 10.0.0.1 is actively using it or not.
Again, 10.0.0.1 is a private IP address and cannot be accessed by a device outside the network. Make sure you are trying to connect to a device that already exists on the network and actively uses it. Sometimes, administrators set up a router with 10.0.0.1 as a static IP address in order to ensure that the address will not change for their clients. This can cause IP address conflict issues and may result in a network-wide issue affecting all the devices on that network.
Though this address is entered by way of console pages on a router, business routers may use different ways like configuration files and command scripts instead. Any error in entering the address or entering it in the wrong place can also be the cause of the connectivity failure.